- Sprayable, 100% solids adhesive
- Offers excellent adhesion to polypropylene and other low surface energy (LSE) plastics
- Extended open time allows for large surface assembly
- Bonds a wide variety of substrates, including most foams, plastics, particle board, light gauge metals
3M™ Sprayable Hot Melt Adhesive 6111 is a high-strength adhesive used to bond most foams, fabrics, particle board and thin metal. This 100% solids sprayable thermoplastic adhesive requires no drying time with minimal overspray and provides a more sustainable solution for increasing productivity. Available in blue and tan.
Offers Excellent Adhesion to Polypropylene and other LSE Plastics
3M™ Hot Melt Spray Adhesive 6111 is a heat applied, 100% solids, sprayable adhesive for a fast and neat alternative to aerosol, contact and solvent-based adhesives. It bonds to a variety of surfaces including low surface energy (LSE) plastics. Ideal for large surface assembly and does not damage heat sensitive surfaces like foam, polystyrene foam and polyethylene.
- Case inserts
- Seating attachment
- Furniture and upholstery
- Large surface lamination
- Cubicle, office partition
Easy and Accurate Application
3M™ Hot Melt Spray Adhesive 6111 is ideal for large surface lamination assemblies, such as laminates to table tops, fabric to foam and veneers to furniture and flooring. By simply adding heat, the user can enjoy a strong adhesive that is easily, quickly and accurately applied to one or two surfaces. Once applied, the adhesive cools to form a long lasting bond. As an added bonus, adhesion is virtually immediate, with an open time of up to 6 minutes depending on the substrate.
Understanding Hot Melt Adhesives
Hot melt adhesives, also known as glue sticks, are liquefied thermoplastic adhesives available in both low and high-temperature versions. Low temperature hot melt adhesives are applied at 250ºF/121ºC temperatures, which makes them ideal for bonding electronics, plastics, cloth and other heat sensitive materials. High temperature hot melt adhesives are applied at 380ºF/193ºC and produce a stronger bond than the low temperature hot melts.
Melted adhesive is extruded through a nozzle using a 3M Hot Melt Applicator by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.