3M™ Platinum™ Plus Glaze, 31180, 30 fl oz

Overview
Additional Information
Product Downloads

Product Description

SANDABLE IN MINUTES: Allows sanding in as little as 15 minutes to help speed up project progress
HIGH ADHESION: Bonds well to galvanized steel, E-coat, metal, aluminum, fiberglass, SMC, OEM topcoats, cured epoxy, and urethane primers
USER FRIENDLY: Stain and tack-free properties help ensure high-quality results
PINHOLE-FREE FINISH: Formulated to leave a smooth, consistent layer without any pinholes

3M™ Platinum Plus Glaze is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.

Make Your Car Look New Again by Covering Minor Blemishes
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

UPC #: 00051131311800, Part #: 31180, SKU: 7000045509

Unit of Measure:

KIT

interval quantity:

Color:

Green

Size:

30 fl oz (US)

Application:

Small Dent Repair, Applying Body Filler

Consistency:

Paste

Container Type:

Pump

Dry Time:

20 min

Handling Time:

3 - 5 min

Paint Time:

45 Minute

Sand Time:

20 Minute

Shelf Life:

487 Days

Work Time:

5 Minutes

Product Data Sheet

Product Type

Technical Data Sheet

Product Videos

Custom Field

Unit of Measure KIT

interval quantity 6

Color Green

Size 30 fl oz (US)

Product Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/Eaq5qdUc5hpMjh7pJ7LsfW0BEj8MhygvO7Is4doLhND-Uw?e=gKPL6p

Application Small Dent Repair, Applying Body Filler

Consistency Paste

Container Type Pump

Dry Time 20 min

Handling Time 3 - 5 min

Paint Time 45 Minute

Product Type Finishing Glaze

Sand Time 20 Minute

Shelf Life 487 Days

Work Time 5 Minutes

Technical Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/EYFMNS-zQTlJjciwqHAncm0BDiZMZB9iKu94sTBCXsJaZg?e=RiyBsE