3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005, Off-White, 45 mL Duo-Pak

Overview
Additional Information
Product Downloads

Product Description

Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
Resists many chemicals, water, humidity and corrosion
Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics composites and metals
Medium viscosity allows controlled dispensing
3 minute work life with 3 hours handling strength
Strong adhesive can replace screws, rivets and welding

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications

Joining plastics to metals, such as in the manufacture or repair of appliances
Bonding low surface energy plastics without priming
Impact resistance composite bonding
Manufacture or repair of various sporting goods equipment
Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

Medium Viscosity Allows Controlled Dispensing
Our 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72° F/22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Compatible Applicators: Manual Applicator

Compatible Nozzles: Orange Nozzles

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

UPC #: 00051128993491, Part #: DP8005, SKU: 7100088846

Unit of Measure:

EACH

interval quantity:

Color:

Off-white

Container Size:

45 ml

Mix Ratio Volume Base : Accelerator:

10 : 1

Full Cure Time:

8-24 Hours @ 72 F (22 C)

Open Time:

3 min @ 72 °F (22 °C)

Set Time:

3 hr

Work Time:

3 Minutes

Shear Strength:

2000 psi

Shelf Life:

547 Days

Storage Temperature:

40 Degree Fahrenheit

Viscosity:

Self-leveling

Product Data Sheet

Technical Data Sheet

Product Videos

Custom Field

Unit of Measure EACH

interval quantity 12

Color Off-white

Container Size 45 ml

Mix Ratio Volume Base : Accelerator 10 : 1

Product Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/EfEhd5vmwNhIjG86PHpOXaUBOYLthA3TsUUTf5Nenu40lA?e=ehRhv0

Technical Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/EUcCa9LBhh9GqT5TJt0ojz4B8UVkCP2Bk147BuBae7_q6Q?e=gmYgbg

Full Cure Time 8-24 Hours @ 72 F (22 C)

Open Time 3 min @ 72 °F (22 °C)

Set Time 3 hr

Work Time 3 Minutes

Shear Strength 2000 psi

Shelf Life 547 Days

Storage Temperature 40 Degree Fahrenheit

Viscosity Self-leveling