3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810, Tan, 200 mL Duo-Pak

Overview
Additional Information
Product Downloads

Product Description

Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
Provides high shear and peel strength and is toughened for impact resistance
10 minute work life and 20 minute handling strength
Bonds oily metals with minimal surface prep
Bonds most plastics, composites and metals

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is a toughened two-part, room-temperature curing acrylic adhesive specially formulated to bond oily metals, plastics, and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ Acrylic Adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Provides High Shear and Peel Strength and is Toughened for Impact Resistance This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end-use applications. Making work safer, faster, and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color.

Recommended Applications Sporting goods (metal to metal, metal to plastic bonding) Appliance manufacturing (metal to metal, metal to glass) Electronic casing assembly 10 Minute Work Life and 20 Minute Handling Strength With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 provides a 10 minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) 3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment. Easy Adhesion with Acrylic Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. Acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Compatible Applicators: Manual Applicator

Compatible Nozzles: White Nozzles

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

UPC #: 00021200313110, Part #: DP810, SKU: 7000121267

Unit of Measure:

EACH

interval quantity:

Color:

Tan

Container Size:

200 ml

Adhesive Type:

Acrylic

Adhesion Strength:

480 oz/in

Full Cure Time:

8-24 Hours @ 72 F (22 C)

Maximum Operating Temperature:

175 Degree Fahrenheit

Mix Ratio Volume Base : Accelerator:

1 : 1

Open Time:

10 min @ 72 °F (22 °C)

Set Time:

10 min

Shear Strength:

3600 psi

Shelf Life:

456 Days

Storage Temperature:

32 F (0 C)

Viscosity:

Self-leveling

Work Time:

10 Minutes

Product Data Sheet

Technical Data Sheet

Product Videos

Custom Field

Unit of Measure EACH

interval quantity 12

Color Tan

Container Size 200 ml

Adhesive Type Acrylic

Product Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/ES6uPOfao9pNjN9Ak4dn0-MBKhqqO1YpR-FiS8ky40yhww?e=bWzhy4

Technical Data Sheet https://bindingsource.sharepoint.com/:b:/s/DATASHEETS/Ed1lGDgs2_JFlCFu0Eph2goByIdLksCxjm6HjDzzKzkRzw?e=n07nIB

Adhesion Strength 480 oz/in

Full Cure Time 8-24 Hours @ 72 F (22 C)

Maximum Operating Temperature 175 Degree Fahrenheit

Mix Ratio Volume Base : Accelerator 1 : 1

Open Time 10 min @ 72 °F (22 °C)

Set Time 10 min

Shear Strength 3600 psi

Shelf Life 456 Days

Storage Temperature 32 F (0 C)

Viscosity Self-leveling

Work Time 10 Minutes